Omnivision Announces 24MP Sensors with 2nd Generation 0.9um Pixels

Image Sensors World        Go to the original article...

PRNewswire: OmniVision announced the second generation of its 0.9um pixels used in 1/2.83-inch 24MP sensors, built on the PureCel Plus stacked die technology. The OV24B sensor family is aimed to front- and rear-facing smartphone cameras and available in four versions:

  • OV24B1Q: 4-cell Bayer imaging; in-pixel binning for optimal sensitivity and low-light performance; and pad locations on the top and bottom of the chip to reduce module size in the x-direction, for front-facing cameras in thin-bezel infinity display phones
  • OV24B2Q: 4-cell Bayer imaging; in-pixel binning; type-2, 2x2 microlens PDAF, for main cameras due to video and low-light performance
  • OV24B1B: monochrome imaging; improved low-light sensitivity; for rear-facing multi cameras for Bokeh and zoom
  • OV24B10: standard Bayer imaging; for main cameras due to high 24MP resolution, as a single camera or as part of a multi-camera arrangement for Bokeh and zoom

As sub-micron pixel technology continues to mature in tandem with evolving performance expectations, it is enabling extremely high-resolution imaging and multi-camera designs, which continue to be growing market trends. These trends apply to both front-facing and rear-facing smartphone cameras,” said James Liu, product marketing manager at OmniVision. “The new OV24B sensor family, with its on-chip re-mosaic, 2x2 ML PDAF, and high-speed video capability, can address the demands of these growing market trends, enabling mobile cameras to provide the very best user experience for autofocus, low-light performance, and high-resolution video and still image capture.

All four versions can output high-resolution streaming video in a variety of formats, including 24MP at 30 fps, 4-cell binning 6MP at 60fps, 4K2K video at 60fps, 1080p video at 120fps, or 720p video at 240fps. The OV24B is in production now.

Go to the original article...

Leave a Reply

css.php